6 Tips For Killing Mould In Your Home

If you’ve got a black mould problem in your home, you’re not alone. Mould is one of those household problems that most people have to deal with at some point or another. The good news is that there are plenty of ways to exterminate mould in your home and prevent it from coming back. This blog post will provide you with a few tips for killing mould in your home.

Here are the tips for you:

Remove the mouldy materials:

The first step in the removal process is to remove the mouldy material. If it’s on a wall, use a scraper or paint scraper to scrape off as much of the mould as possible. If it’s on your ceiling, you may need to use an overhead ladder and painter’s tape to get at all of it.

Once you’ve removed as much of the mouldy material as possible with either scraping tools or vacuums (depending on where it is), vacuum up any dust left behind by these tools so that no spores are left behind for future growth!

Wash the area with soap and water:

After vacuuming, wash the area with soap and water. Use a sponge or cloth to scrub the surface, being sure to get all of the mouldy areas. If possible, use hot water as it will help kill any remaining spores and prevent them from returning. If you have detergent on hand (think laundry detergents), you can add some of this into your cleaning solution for added disinfectant power. Rinse thoroughly after washing off any residue from your cleaning efforts

Use bleach to remove mould spores:

Bleach is a good way for killing mould. You must use regular bleach and not any other type of detergent, as these can be harmful. Also, do not mix bleach with other cleaners or even water! If you do this, it will create harmful fumes that could make you sick or even kill you. When using bleach on your home’s surfaces, wear protective gear such as goggles and gloves so that the vapours don’t get into your eyes or on any open wounds on your skin. Never mix ammonia with bleach! This combination causes chlorine gas which is extremely dangerous for humans (and animals).

Wait for the area to dry completely before applying a sealant or paint:

When you’re dealing with a mould problem, it’s important to know that mould is a fungus and needs moisture to grow. If you try to paint over or seal an area that hasn’t dried completely, the spores could simply come back.

To prevent this from happening, wait until your home has been thoroughly dried out before applying any sealant or paint. You can help speed up this process by using fans in conjunction with dehumidifiers (more on those later).

Control humidity to prevent future growth:

To prevent further mould growth, you’ll want to control humidity in your home. Humidity is the amount of water in the air. High humidity encourages mould growth and can lead to dry skin and hair, while low humidity can cause cracked lips or chapped hands.

Dry out the area thoroughly before using it again:

The next step in killing mould is to dry out the affected area. If you have a dehumidifier, use it to dry out the area. If not, try using fans and towels to absorb moisture from your home’s surfaces. Once you’ve removed as much moisture as possible, clean up any remaining debris with a damp cloth before drying out with an electric hair dryer or another heat source

Conclusion

Mould can be a big problem in your home, but it’s not impossible to fix. However, there are many ways for killing mould such as using bleach, vinegar and baking soda. You can also use a combination of these methods to kill mould faster. If you don’t have time or patience for the DIY approach, call in a professional who can get rid of any mould problems that may be lurking in your home.